Wall Insulation (Dense-Pack)

Many older homes were built with empty wall cavities, or with insulation that has settled and thinned over the decades. Protect Environmental fills those cavities using dense-pack insulation, a retrofit process that works through small, strategically placed holes rather than opening up your walls, so your siding and interior finishes stay intact.

Reviewed by
General Manager
Dense-pack wall insulation A continuous wall frame extends to both sides of two cutaway cavities. The left cavity is fully insulated from bottom to top with its access hole patched. On the right, insulation enters through a small access hole and fills the cavity to the top.

What Dense-Pack Wall Insulation Involves

Dense-pack insulation fills each wall cavity, one stud bay at a time, through small access holes drilled from the exterior siding or interior wall surface. Cellulose, the same material Protect uses as its primary attic insulation, is blown in at a higher density for this application, packing the cavity fully rather than loosely, including around wiring, outlet boxes, and other obstructions inside the wall. See our Blown-In Cellulose Insulation page for more on the material itself.

Once a cavity is filled, the access hole is patched to match the surrounding surface. The process is repeated cavity by cavity until the scoped wall area is complete.

Why Dense-Pack Matters for Older Homes

Homes built before current insulation standards often have wall cavities that were never insulated at all, or that received a thin layer of insulation that has since settled, leaving gaps at the top of the cavity. Because dense-pack fills the cavity completely and at high density, it's less prone to the settling that can affect loosely-packed material over time, and it reaches spaces that would otherwise require removing drywall or siding to access.

A Minimally Invasive Retrofit

No Need to Open Up Walls

Installed through small access holes, not demolition.

Fills Cavities Completely

Packed at high density to reduce the settling gaps that can occur with loosely-blown material.

Part of a Whole-Home Approach

Scoped alongside attic insulation and air sealing where it makes sense for your home, see our Attic Insulation and Air Sealing & Weatherization pages.

Our Wall Insulation Process

  1. Inspection and Plan

    On-site inspection of accessible wall cavities to confirm current insulation levels, followed by a written plan identifying which walls are scoped.

  2. Access Holes

    Small holes are drilled at each stud cavity, typically from the exterior siding or interior wall surface.

  3. Dense-Pack

    Cellulose is blown into each cavity at high density until fully packed.

  4. Patch and Document

    Access holes are patched to match the surrounding surface, and the completed work is documented.

Ready to Fill the Gaps in Your Walls?

Request Service

Not Sure Yet? Start With an Assessment

Not sure if your walls are already insulated, or how well? An assessment will confirm current conditions and whether dense-pack wall insulation is the right fit, alongside your attic and air sealing needs, see our Attic Insulation page for how the two are often scoped together.

Learn More

The Protect Promise

Whole-Home Approach

We look at wall insulation as part of the building envelope as a whole, not an isolated project.

Building-Science Approach

Inspection and diagnostics guide every recommendation, not a standard package.

Radon-Aware Crews

Our crews are trained to identify and protect existing radon system components during insulation work.

Wall Insulation in Your Area

Wall insulation is currently available in Denver, CO and Salt Lake City, UT.

Frequently Asked Questions

How do you insulate a wall without opening it up?

Through dense-pack insulation, a retrofit process that fills each wall cavity through small access holes drilled from the exterior or interior surface, rather than removing drywall or siding. The holes are patched afterward to match the surrounding surface.

What is dense-pack insulation?

Dense-pack insulation is cellulose blown into a wall cavity at high density until the cavity is completely filled, including around wiring and obstructions inside the wall, rather than loosely filled the way attic insulation typically is.

Will dense-pack insulation settle over time like loose-fill insulation can?

Because dense-pack is packed at high density to completely fill the cavity, it's less prone to the settling gaps that can occur with loosely-blown material over time.

Can you tell if my walls already have insulation?

An on-site assessment can confirm current conditions in accessible wall cavities. This is something Protect checks before recommending wall insulation, rather than assuming based on your home's age alone.

Will wall insulation affect my radon mitigation system?

Protect's crews are trained to identify existing radon system components, such as vent pipes and sealed penetrations, and work around them so your system continues to function as designed.

Talk to Protect Environmental About Wall Insulation

Request My Service

Find Your Local Office

What's Your Radon Risk?

Enter your zip code to learn about the radon levels near you.

what's your radon risk?