October 2024 | Protect Environmental

Phoenix is known for its sunny weather and beautiful desert landscapes, but there’s something else beneath the surface of Arizona soil: radon gas. Understanding radon essential for keeping your family safe. Radon can be found across the United States and you should test for radon in your Phoenix home.

Let’s dive into what radon is, why it matters, and what you can do about it in Phoenix.

Is The Level of Radon in Phoenix Higher Than The National Average?

Radon levels in Phoenix aren’t typically higher than the national average, but that doesn’t mean you’re off the hook. Radon levels can vary widely even within the same neighborhood due to differences in soil and construction. The only way to know if your home has a radon problem is to test for it.

What is the Acceptable Level of Radon?

The easy answer to this is zero, but unfortunately, that’s just physically impossible. Since radon is a naturally occurring radioactive gas, there will always be some level of radon in Arizona homes.

The EPA says that if your home has radon levels at or above 4 picocuries per liter (pCi/L), you need to take action to reduce the level. Even levels between 2 pCi/L and 4 pCi/L can pose a risk, so it’s a good idea to consider mitigation at these levels as well.

What To Do If There Are High Radon Levels in Your Home

So, what steps should you take if you suspect radon in your Phoenix home? If you find out you have high levels of radon, start by:

Ordering a radon test kit: You can use a radon test kit to get an idea of the radon levels in your home. Luckily, most of these radon kits are FREE to the residents of Phoenix, Arizona!
Double-Checking with Another Test: It’s smart to confirm the initial results with a follow-up test.
Talking to a Pro: Get in touch with a specialist in radon mitigation in Phoenix. They can help you figure out the best way to reduce radon levels in your home.
Setting Up a Mitigation System: The most common fix is a soil suction system, which vents radon from under your house to the outside. This can significantly lower the radon levels in your home. Protect Environmental offers radon mitigation in Phoenix to bring these levels down to a safer level.

Is Radon Detectable Without a Testing?

Unfortunately, no. Radon is invisible, odorless, and tasteless, making it impossible to detect without specialized equipment. This means that even if you don’t see, smell, or taste anything unusual, your home could still have elevated radon levels.

The only way to know if you have it is through radon testing your Phoenix home.

Why is Radon Testing in Phoenix So Important?

As we’ve mentioned, the unique soil and geological conditions in Phoenix can lead to varying radon levels, and the only way to know if your home is affected is through testing. Though levels in Arizona are typically lower or average, radon testing your home in Phoenix, Arizona is crucial for these reasons:

Protect Your Health: Long-term exposure to radon can have serious health effects. Testing lets you know if you need to take action.
Peace of Mind: Knowing the radon levels in your home can give you peace of mind, ensuring that your living environment is safe.
Boost Property Value: Homes with low radon levels or a mitigation system in place can be more attractive to potential buyers.
Stay Proactive: Regular testing means you can monitor radon levels over time and address any changes promptly.

Why You Should Get Your Home Tested Even If You Don’t Have a Basement

It’s a common misconception that only homes with basements need to worry about radon. However, radon can affect all types of homes, including those built on slabs, crawl spaces, or with other types of foundations. Here’s why radon testing in Phoenix is essential regardless of your home’s design:

Radon Can Enter Through Any Foundation: Radon gas can seep into homes through cracks in floors, walls, and foundations, as well as gaps around service pipes and construction joints. Even homes without basements have these potential entry points.
Soil Gas Permeation: Radon originates from the soil beneath your home, and it can permeate through various types of foundations. Whether your home is built on a slab or has a crawl space, the gas can still find its way inside.
Preventive Measure: Even if your home doesn’t currently show high radon levels, testing ensures you catch any future changes due to structural shifts, soil changes, or other factors that might increase radon levels over time.

Get Effective Radon Testing and Mitigation in Phoenix

When it comes to radon testing and mitigation in Phoenix, getting professional help is key. Here’s what you can expect from radon testing and professional mitigation companies like Protect Environmental:

Accurate Testing: A team member will notify you about your radon levels and best steps moring forward for your home.
Custom Mitigation Solutions: If high radon levels are found, experts can design and install a mitigation system tailored to your home’s needs. These systems effectively reduce radon levels and keep your indoor air safe.

Take Action for a Healthier Home

Don’t take chances with the radon risks in Phoenix homes. If you’re concerned about radon, now is the time to act. Schedule your radon testing and mitigation in Phoenix with Protect Environmental.

Contact a local radon expert today to learn more about how you can protect your home and loved ones.

A properly finished basement is a valuable addition to any home. However, multi-level homes often face issues with high radon levels and moisture control in basements. when it comes to the do’s and don’ts of finishing a basement, its important to pay attention to flooring, drainage, and radon.

Here’s a comprehensive guide on what you need to know about radon in basements and how to finish this space to ensure its safety and longevity.

How Common is Radon in Basements?

Radon is a naturally occurring radioactive gas that can enter homes through cracks and openings in the foundation. Basements, being below ground level, are particularly susceptible to radon infiltration.

In fact, the EPA estimates that nearly 1 in 15 homes in the U.S. have elevated radon levels, and basements are often the most affected areas. And in some areas in the U.S., over 50% of homes have elevated radon levels. This makes radon testing for basements imperative to determine the next steps before continuing a renovation.

What Causes High Levels of Radon in Basements?

Radon in homes can be influenced by several factors. Understanding them can help homeowners take proactive measures to reduce radon exposure in an unfinished basement or in a home without a basement.

Soil Composition: Radon is produced by the decay of uranium in the soil, which varies by region.
Foundation Type: Depending on whether gravel is underneath your foundation or just a slab, the radon levels of your home can be affected.
Foundation Cracks: Even minor cracks in the foundation can allow radon to seep into your basement.
Air Pressure Differences: Lower pressure inside your home compared to the surrounding soil can draw radon gas indoors.

Additional Contributing Factors For Radon in Homes

Water Supply

Homes that use well water can have higher radon levels, as radon can dissolve and accumulate in groundwater. When this water is used for drinking, cooking, or bathing, radon can be released into the air.

Testing your water supply for radon, especially if you have a private well, is essential in comprehensive radon mitigation.

Building Materials

Certain building materials, such as granite, concrete, and certain types of brick, can emit small amounts of radon. While the contribution from building materials is typically much lower than from soil, it can still add to the overall radon levels in the home, especially in well-sealed, energy-efficient buildings where air exchange is limited.

Seasonal Variations

Radon levels can fluctuate with the seasons. During winter, homes are usually sealed to conserve heat, reducing ventilation and potentially increasing radon levels. Conversely, in the summer, windows and doors may be open more frequently, increasing ventilation and lowering indoor radon levels.

Regular testing during different seasons can provide a more accurate picture of your home’s radon levels throughout the year.

How To Determine if There's Radon in My Basement

Testing is the only way to know if you have high radon levels in your basement. You can purchase a radon test kit or hire a professional radon testing service. Regular radon testing for your basement is recommended, especially if you haven’t tested in several years or if you’ve made significant changes to your home.

How to Reduce Radon in an Unfinished Basement (or Finished)

If you test your home for radon and the levels come back higher than the recommended 4.0 pCi/L or lower, you’ll need radon mitigation for your basement. Reducing radon levels in a basement typically involves installing a radon mitigation system.

Here are some effective methods:

Sub-Slab Depressurization System (SSDS): This system involves venting radon from beneath the foundation before it can enter the home.
Sealing Cracks: Seal all cracks and openings in the foundation and basement walls to reduce radon entry.
Ventilation: Increase ventilation in the basement to help dilute and disperse radon gas.

Can You Prevent High Radon Levels in a Basement?

While completely preventing radon from entering your home is challenging due to its natural occurrence, there are effective steps you can take to minimize its entry and ensure a safer living environment.

Proper Construction: Ensure new homes are built with radon-resistant features.
Regular Maintenance: Keep your basement well-maintained and promptly address foundation cracks or openings.
Testing and Mitigation: Regularly test for radon and install a mitigation system if levels are high.

The Dos And Don’ts For Properly Finishing A Basement

A basement should be built like a boat to keep water out. But most houses are built on porous walls and floors with nothing between the wet and the dry. In a home built like a sieve, if you want finish materials in the basement, you must first manage the moisture in the walls and floor.

Here’s a list of dos and don’ts that show everything you need to know about finishing a basement.

Drainage:

DO install a drain-tile system with a sump pump that discharges any water within a minimum of 5 feet from the foundation.
DO extend the interior drainboard from the drain tile to at least 6 inches above grade. The best sheathing is dimpled.
Don’t allow water discharge to pool near the foundation, as this can lead to increased moisture and potential radon entry.
Don’t ignore regular maintenance of the sump pump and drain-tile system; ensure they function correctly to prevent water accumulation.
Don’t use non-dimpled sheathing, as it may not provide adequate drainage and moisture control.

Walls

DO frame with steel studs set on a capillary break, such as a sill seal (this also helps with uneven floors).
DO hold framing 1 inch away from the foundation walls—no exceptions!
DO spray high-density polyurethane foam 2 to 3 inches thick behind the stud wall and all the way up onto the rim joist. If you choose to use batt insulation, don’t let it touch the foundation walls.
DO install paperless drywall and hold it ½ inch off the floor.
DON’T let the wall framing touch the walls or the floor (treated lumber wicks water).

Floors

DO install an active Sub-Slab Depressurization System (SSDS) to control moisture and radon. The SSDS can remove up to 10 gallons of water a day from under your home, helping to improve air quality and reduce the potential for mold and musty odors. As a side benefit, it will also reduce radon levels in your home!
DO use moisture-resistant flooring, such as ceramic tile or vinyl composition tile. If you want the look of wood, cover the slab with a vapor-control layer with taped seams and install a glued or dry-fit engineered click-lock floating floor system.
DON’T install carpet.

Radon

DO test your home every two years whether your basement is finished or unfinished.
DO have a professionally installed mitigation system if your radon levels are 4.0 pCi/L or above.
DON’T neglect to have your radon mitigation system maintenance by a radon professional.

Contact Us for Radon Testing and Mitigation

Ensuring your basement is safe from radon is our top priority.

If you’re concerned about radon in your basement, contact us today to schedule a radon test. Our team of experts can also install the best radon mitigation system tailored to your home’s needs.

Test My Home!

Professional radon testing is the first step to making your home a safe place to breathe.

Residential Radon Services

Resource Library

About

Careers

News